Furnace Tune-Up

Service Description

Check thermostat operation | Inspect condensate drain pan | Replace air filter | Inspect evaporator coil | Check system temperature split at registers | Safety Inspection of heat exchanger and burners | Resurface flame censor | Check voltage and amp draws on all motors | Check capacitor ratings & levels | Inspect for visible duct leaks | Tighten electrical connections | Check relays | Adjust gas pressure | Check pilot operation | Test all safety Devices | Check all wiring | Condensate drain line inspection | Inspect bearings and lubricate (if needed) | Check for plenum air leaks | Blow out cabinet doors for dust | Inspect indoor blower motor amps and dirt build-up | Inspect for gas leaks